This was the first render after getting the board outline roughly done.
Couple more after adding in everything. I decided to make the footprint for the Stick in a way that either the stock Wavebird Stick can be used, or a PS3 style Stick can be installed if a Stick button is needed.
Here is the prototype made up for checking and testing things out.
The 'C-stick' board will also get redone so either type of Stick can be used in it's place.
X-stick board
I haven't decided yet if I'll redo the small LTrig and RTrig boards, since they can just be swapped over from the original board and are only a button contact, there's not much point in reinventing that wheel.
There are a few things that need to be tweaked on the main board before I'll consider this one complete, but I figured I'd show it off as is.