pcb help (solved)

[MigueLLLLL]

so again no one is helping me on my thread so just to get youy attetion i have this problem i have my pcb that looks like this:

pcb.png (12.31 KiB) Viewed 7728 times

so how would i wire this pcb to the rest of my stuff ( i known this is probly a super noob question but please help )

[nachoz12341]

DUDE SERIOUSLY stop making so many posts not every one is online all the time to answer all your questions so just be patient

[MigueLLLLL]

i have a deadline for next wensday plus this is my second question posted off my thread since i started it so how is that to many

[Jidan]

On your PCB, you should have JUST TWO spots where it puts out a positive and negative signal. You'll want to wire from that spot to the charging jack. There should be a pin sticking out of the center of the jack where you'll wire your POSITIVE wire. There should also be another pin that comes out of the outside shielding that you'll connect the NEGATIVE wire to. You said there are two on the outside - if they go to the same place, then you only need to wire one. Hope this helped.

[timmeh87]

Dude what is that supposed to be a picture of? Have you tried RTFM

[snowpenguin]

Use one thread to ask all your questions, not 50.

[MigueLLLLL]

lol thanks

Use one thread to ask all your questions, not 50.

i have only a couple questions on there and this is the 2ed one off my thread so how is that "50" ( excuse me for not being patient, that just a quality i don't have

Dude what is that supposed to be a picture of? Have you tried RTFM

well im not an artist but there is not manual for the battery and if there was one i would not be posting this -_-

On your PCB, you should have JUST TWO spots where it puts out a positive and negative signal. You'll want to wire from that spot to the charging jack. There should be a pin sticking out of the center of the jack where you'll wire your POSITIVE wire. There should also be another pin that comes out of the outside shielding that you'll connect the NEGATIVE wire to. You said there are two on the outside - if they go to the same place, then you only need to wire one. Hope this helped.

there are FOUR spots on my pcb i dont know why and i already know how to hook up the charging jack

NOW come on if your not gonna post an ligit answer then dont post anything at all

[MigueLLLLL]

AH i figured it out! problem solved

[Jidan]

I was completely serious when I posted my response - I noticed in another thread that you were trying to get help for the charging jack and assumed that you still needed help with it since you made a new thread.

[MigueLLLLL]

an no i found out that were i was looking on the board was wrong i found the 2 points thanks for the help

[nachoz12341]

lol thanks

Use one thread to ask all your questions, not 50.

before your main build thread you made 50 stupid topics a day over things in the stickies \

i have only a couple questions on there and this is the 2ed one off my thread so how is that "50" ( excuse me for not being patient, that just a quality i don't have

sorry didnt know how to quote

[joeyjoe9876]

that... wasn't directed towards you....

[MigueLLLLL]

lol thanks

Use one thread to ask all your questions, not 50.

i have only a couple questions on there and this is the 2ed one off my thread so how is that "50" ( excuse me for not being patient, that just a quality i don't have
before your main build thread you made 50 stupid topics a day over things in the stickies

no sh!t dude then hailrazer told me to make a thread so dont bring up stuff in th past and stick to the GOD DAM question and stop trying to ride!