Hailrazer's 4th N64 Portable.. Another Clone -- FINISHED

[hailrazer]

And the paint doesn't get scratched off at all? (I guess because of so many coats)

Of course the paint can get scratched off. Even with a clear coat the paint will get scratched off if you scratch it bad enough. But Krylon fusion actually etches itself into the plastic. So even if you scratch it the paint has gone far enough into the plastic that it is the same color in the scratch.

[Jidan]

Well I know it will scratch off if you sit there and try, but I meant is it easy to accidentally scratch off, which I guess is a no for the most part

[argelfraster]

I'm using both a super pad and an official gamecube joystick, but I cant quite get it to work.
How are you wiring yours up?

There are three different boards on the SuperPad's, so it depends on what revision you have.

SuperPad 64 Plus (on the back it says P300 next to the controller name) if that helps at all.

[technoman]

i like the paint job you should get a matte clear coat so its not shiny at all even in the bright sun

[hailrazer]

Finished :

[limpport]

Oooooo, shiny.....!

[neverused]

I like it, though if I remember correctly, this will be your last Kamikaze, right? If it's not, have you considered placing the fany where the coin battery recess is, so you can avoid filling that part?

[hailrazer]

I like it, though if I remember correctly, this will be your last Kamikaze, right? If it's not, have you considered placing the fany where the coin battery recess is, so you can avoid filling that part?

It won't fit anywhere but on either side under the triggers. No room anywhere else.

[neverused]

I noticed that you elected to keep the original heatsinks (a la Darth64 I believe), do they work just as well as the other ones you've used in the past?

[hailrazer]

I noticed that you elected to keep the original heatsinks (a la Darth64 I believe), do they work just as well as the other ones you've used in the past?

I switched back to smaller heatsinks, I didn't have room for the original.