What System Should I Take A Crack At?

gotchocolatemilk2 · Post by **gotchocolatemilk2** » Tue Feb 22, 2005 7:43 pm

hey KnyghtwhosaysNI i noticed you are from kansas
so are you a kstate or ku fan?

Guest · Post by **Guest** » Thu Feb 24, 2005 7:43 am

Jeff wrote:Alright, I"m only 13 and this will be my first project, my mom might say no if she doesn't like.

So which one? SNES, NES, or Genesis?

NOTE: I can easily access all 3 consoles, and someone near buy sells the Super Joy's, so NOAC's can be got.

wow...if your mom won't let you build this then i'll laugh at you...

honestly dude, you don't need her permission to build something so incredibly NOT dangerous...just build it and surprise her

JackFrost22 · Post by **JackFrost22** » Thu Feb 24, 2005 4:41 pm

Please be quiet most respected guest, my dad wont let me mess with lasers. Partly cause my uncle was half blinded by one.

Insert_Name_Here · Post by **Insert_Name_Here** » Fri Feb 25, 2005 5:22 pm

The first system I had was a SNES so thats probaly what I'm gonna do. As for you, you should pick whichever one you like most. Portabilizinating the Genesis would be a waste, considering that you can just buy the Nomad.....

JackFrost22 · Post by **JackFrost22** » Fri Feb 25, 2005 7:20 pm

Ever use a nomad. it takes too much power. Its also fun to make a portable.

Insert_Name_Here · Post by **Insert_Name_Here** » Fri Feb 25, 2005 8:05 pm

Yea I used a Nomad, power didn't seem to be a problem.

JackFrost22 · Post by **JackFrost22** » Fri Feb 25, 2005 8:07 pm

The screen also gets blurry

MM007 · Post by **MM007** » Fri Feb 25, 2005 8:23 pm

NES: connector wears out and needs replaced.

SNES: Needs special screwdriver bit to remove casing, can be remedied by using hammer and breaking the case...CAREFULLY!

Genesis: Power hog for early models, compatability issures with newer Genesis 3 and Redica.

I pick the SNES.

gamer2 · Post by **gamer2** » Tue Mar 01, 2005 3:44 pm

i would say Genesis would be good becouse if you can get a Radica and a cart-port, it could be a small portable couse the Genesis carts are small

chicken strip · Post by **chicken strip** » Wed Mar 02, 2005 4:00 pm

MM007 wrote:SNES: Needs special screwdriver bit to remove casing, can be remedied by using hammer and breaking the case...CAREFULLY!

u dont NEED a special screwdriver... my n64 had those weird screws... i just melted the back of a ballpoint pen and stuck it in and waited for it to dry... when u pull it out it has a mold... (a little tip for anybody who tries... dont use a roundstick white pen... use one of those crystal ones... the clear kind... without a coloured top that coloured plastic is too rubbery)

Jeff · Post by **Jeff** » Wed Mar 02, 2005 9:29 pm

She gave me the no

. Now I'll buy Ben's book for the hell of it

.

Insert_Name_Here · Post by **Insert_Name_Here** » Sat Mar 05, 2005 7:01 am

Jeff wrote:She gave me the no . Now I'll buy Ben's book for the hell of it .

Why can't you do something like this? It's not dangerous.

Post by **Sparkfist** » Sat Mar 05, 2005 2:19 pm

Insert_Name_Here wrote:
Jeff wrote:She gave me the no . Now I'll buy Ben's book for the hell of it .
Why can't you do something like this? It's not dangerous.

Sure it is you could hold the soldering iron on the wrong end or even shock yourself with electricity, nothing big.

Stranger · Post by **Stranger** » Sat Mar 05, 2005 3:17 pm

You could almost gouge your eye out with wire. That wouldn't be good. If you could even make that happen.

benheck.com Forums

What System Should I Take A Crack At?

Which Console?

Re: What System Should I Take A Crack At?