ShockSlayer's X64 progress. Yes, I have better progress.

ShockSlayer · Post by **ShockSlayer** » Sun Jul 02, 2006 5:23 pm

Well....WAIT! WHAT DOES U MEANS BIE SPECIAL!?!? lol. I changed my design. AGAIN! Let me draw up a quick pic.

Gamecube design. Already working on it. Z will be behind dpad. n64 l will replace gamecube l beacuse i burnt the gamecube l on .

Krepticor · Post by **Krepticor** » Sun Jul 02, 2006 8:21 pm

Hey Iam just saying that will be kinda hard to get oriented to...especially after growing up with the GBC's and the GBA's and the NDS and PSP's and such

Why not take a little more time and relocate the buttons on a n64 controller and build it into the portable itself?

You don;t have to but itis what I am trying to do (If I quit frying my crap)

ShockSlayer · Post by **ShockSlayer** » Mon Jul 03, 2006 10:50 am

well, i put my gamecube in the middle, and i could hold it for about 20 minutes. so batteries, psone screen, and n64 makes it very light. The controller stayed on the modle pretty good, but the other parts didnt cause they were flimsy. I just need a good way to get the controller on it. A lot of people dont have faith in me, but once you see the end result, im sure you will change your mind. I tried putting the buttons in on my very first design, which was like marshall's first one. But I ed it up. So dont worry, the end result will be sweet.

SS

ShockSlayer · Post by **ShockSlayer** » Mon Jul 03, 2006 11:36 am

also, i finished putting the n64's L on the Gamecube controller's case.

I'm getting a pots controller from vb_master. And I dont care if the wires are big, its all I have.

ShockSlayer · Post by **ShockSlayer** » Sat Jul 08, 2006 5:59 pm

Well, Huge updates.

Be careful when messing around in the n64. THERE ARE GROUNDS INSIDE THE BOARD!

Edit: Here is a pic of an error that me dad pointed out!

Switch's power touching the grounds! It's near the middle of the pic. the 2 gray thingys

SS

ShockSlayer · Post by **ShockSlayer** » Sun Jul 09, 2006 7:05 am

Ok. I'm still new to taking pictures. No way I have a crap camera

SS

ShockSlayer · Post by **ShockSlayer** » Wed Jul 12, 2006 9:38 am

Ok I have a lot of it done. Why does no one care about my n64p?

ShockSlayer · Post by **ShockSlayer** » Wed Jul 12, 2006 10:44 am

anotherperson wrote:

Post some more pics. I like pics. How about an overall picture of everything you've done so far? With the controller L mod, are you going to sand it all smooth and paint it? I reckon there is a lot of potential for extra coolness there. I am really tempted to add some frankenmodding to my case after fiddling with some putty I bought. I won't hijack your thread with my ideas though.

I'm getting one of those over all pics. I really dont know about the Sanding or whatever. I might make it look better, later of course. I need this done before friday, when I go on my trip. The battery is the biggest issue, I need to get it to power the n64, but I'm not getting much help.

Check the first post for pics. I'm headed outside to solder up the controller's d-pad.

ShockSlayer · Post by **ShockSlayer** » Wed Jul 12, 2006 11:06 am

I'm afraid to open it. I'm going to upload a pic. I'm tired of uploading. im going to go work on my n64p

SS

ShockSlayer · Post by **ShockSlayer** » Thu Jul 13, 2006 5:33 pm

Ok. I'm officially P.O. I have to quit this project untill I get back from sea world. until then I have a temporary portable gamecube.

See you guys monday! Give me as much info as you can on the joystick mod!

ShockSlayer · Post by **ShockSlayer** » Tue Jul 18, 2006 9:06 am

K, I'm back... Umm. Loss on progress, but it should be working again soon...

ShockSlayer · Post by **ShockSlayer** » Fri Jul 21, 2006 4:33 pm

Well, the project has come to a complete halt. My screen won't work, my battery serves no purpose, I don't know if my n64 even works, and my controller is not control stick friendly...

I made a wiring diagram though...

SS

TitaniumHamster · Post by **TitaniumHamster** » Fri Jul 21, 2006 5:00 pm

ShockSlayer wrote:
I made a wiring diagram though...

Woo! Wiring Diagrams!

ShockSlayer · Post by **ShockSlayer** » Fri Jul 21, 2006 5:02 pm

Its only for power, but i'll do video once I get a psone screen...

timmeh87 · Post by **timmeh87** » Fri Jul 21, 2006 11:37 pm

pics?