nintendo ds

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:22 pm

is fuse 2 in the same place?

and how would i fix that just put a peice of wire and jump over it right?

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:23 pm

and what are the 2 fuses labled?

vb_master · Post by **vb_master** » Tue Mar 21, 2006 3:24 pm

F2 is next to the power plug. I don't know the values, sorry, I just know the silkscreen names. Does the light stay green or not?

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:31 pm

no it turns green then red then shuts off (all really quik)

vb_master · Post by **vb_master** » Tue Mar 21, 2006 3:32 pm

Zee100 wrote:no it turns green then red then shuts off (all really quik)

Do you have a GBA SP charger? Plug it in, and see if that changes it. If it still does that, then check F2, and bridge it with a piece of wire.

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:41 pm

i pluged it in and not only did it not make a defierence the orange charge light goes on for a sec then turns off

vb_master · Post by **vb_master** » Tue Mar 21, 2006 3:43 pm

Zee100 wrote:i pluged it in and not only did it not make a defierence the orange charge light goes on for a sec then turns off

Check F2, and bridge it with a piece of wire. If you can't find it, I might have a picture.

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:44 pm

OK NOW THE GREE/RED LIGHT DOSENT TURN ON AT ALL this stinks are you sure that it couldnt just be because the top/bottom screens not atached

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:45 pm

OK NOW THE GREEN/RED LIGHT DOSENT TURN ON AT ALL this stinks are you sure that it couldnt just be because the top/bottom screens not atached

vb_master · Post by **vb_master** » Tue Mar 21, 2006 3:45 pm

It should work without the top or bottom screens. Wait till you get your screens and put them on, and if it still doesn't work, then bridge F2.

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 3:45 pm

k ill try that

vb_master · Post by **vb_master** » Tue Mar 21, 2006 3:46 pm

Zee100 wrote:k ill try that

No, read my edit.

Zee100 · Post by **Zee100** » Tue Mar 21, 2006 4:07 pm

ok ill wait till i get my screens then ill check it

vb_master · Post by **vb_master** » Tue Mar 21, 2006 6:02 pm

Zee100 wrote:ok ill wait till i get my screens then ill check it

Let me just check, did you find the two fuses? I have pictures from Lik Sang that are helpful (I edited them so the fuses were visible).

Zee100 · Post by **Zee100** » Wed Mar 22, 2006 4:28 pm

i think i found them one says f1 and the other f2 are they the ones?

benheck.com Forums