moose jr.'s cart slot

OfWolfAndMan · Post by **OfWolfAndMan** » Mon May 16, 2005 5:01 am

IFR could write a great how-to on spamming

*o* · Post by ***o*** » Mon May 16, 2005 5:12 am

lol i would like to read that

Warrior_Rocker · Post by **Warrior_Rocker** » Mon May 16, 2005 7:06 am

a tutorial all about the wonders of the meat in a can, i love it

I FINALLY REGISTERED. · Tue May 17, 2005 1:43 am

IFR's TUTORIAL ON HOW TO SLAP YOURSELF.

1. OPEN right HAND.
2. PUT HAND 2 feet from your right cheek, with your palm paralell with the right side of your nose.

3. pull hand with as much thrust as possible towards your face.'

4. enjoy!

*o* · Post by ***o*** » Tue May 17, 2005 1:58 am

good work now stop spamming our forum

Unidentified Assilant · Tue May 17, 2005 3:47 am

Unidentified Assilant's Mega Super-Duper How-To on how to write How-Tos!

1. Open Notepad
2. Write Instructions
3. Save Your File
4. Pat Yourself On The Back
5. Do A Song And Dance
6. Eat Some Food (optional, if you are hungry or not)

DISCLAIMER: I am not reponsible for any injuries or damage caused using this how-to

Warrior_Rocker · Post by **Warrior_Rocker** » Tue May 17, 2005 4:27 am

GREAT, now that we have an outline to follow when writing a tutorial we will all know, forever and always we will have to refer to the above instructions, as the all time most comprehensive outline for writing a tutorial

*o* · Post by ***o*** » Tue May 17, 2005 4:47 am

i have found a way to make a scsi extension cable i found male to male connnectors and i had a female to female so its problem solved

Warrior_Rocker · Post by **Warrior_Rocker** » Tue May 17, 2005 12:19 pm

dude, thats great, just make sure you break out the pins near the middle of the male end, so you know which way you plug it into the n64 board, also your gonna spend like 5 min bending the pins correctly for the male end to plug into the n64 board, but once its in there, it stays, id reccomend gluing the female end on the cart plug somehow, becuase it can sometimes become loose and produce symtoms of your n64 baord being fried or something..., just make sure you have your board working before you try to do the scsi cable mod, then you can work from there...

Unidentified Assilant · Tue May 17, 2005 12:42 pm

Unidentified Assilant wrote:Unidentified Assilant's Mega Super-Duper How-To on how to write How-Tos!

1. Open Notepad
2. Write Instructions
3. Save Your File
4. Pat Yourself On The Back
5. Do A Song And Dance
6. Eat Some Food (optional, if you are hungry or not)

DISCLAIMER: I am not reponsible for any injuries or damage caused using this how-to

Ahh... I've released why I put that DISCLAIMER there... you might disolcate your elbow patting yourself on the back.

Side Note: Am I the first person to quote your own post?

*o* · Post by ***o*** » Tue May 17, 2005 3:09 pm

Warrior_Rocker wrote:dude, thats great, just make sure you break out the pins near the middle of the male end, so you know which way you plug it into the n64 board, also your gonna spend like 5 min bending the pins correctly for the male end to plug into the n64 board, but once its in there, it stays, id reccomend gluing the female end on the cart plug somehow, becuase it can sometimes become loose and produce symtoms of your n64 baord being fried or something..., just make sure you have your board working before you try to do the scsi cable mod, then you can work from there...

it seems to work but i need a new cable mine is 6m long (18foot)

Warrior_Rocker · Post by **Warrior_Rocker** » Tue May 17, 2005 3:34 pm

yea, thats gonna be a little long, just cut the cable?

nos_slived · Post by **nos_slived** » Tue May 17, 2005 5:17 pm

If he cuts the cable, he will have to resolder every wire... LOL

Hey, you could put the game on a table, and walk around the room while you play. Go into town and walk around with 15 feet of wire behind you?

Warrior_Rocker · Post by **Warrior_Rocker** » Tue May 17, 2005 5:59 pm

Warrior_Rocker wrote:dude, thats great, just make sure you break out the pins near the middle of the male end, so you know which way you plug it into the n64 board, also your gonna spend like 5 min bending the pins correctly for the male end to plug into the n64 board, but once its in there, it stays, id reccomend gluing the female end on the cart plug somehow, becuase it can sometimes become loose and produce symtoms of your n64 baord being fried or something..., just make sure you have your board working before you try to do the scsi cable mod, then you can work from there...

nos get the idea he is saying before stating something completely wrong, he is doing my idea, to just use a modified scsi extenstion cable, the point is, is that he is not soldering everywire..., and common, who would 'solder' a 18 foot cart extender, unless ur just weird...

nos_slived · Post by **nos_slived** » Tue May 17, 2005 6:24 pm

Warrior, get the idea you said cut the cable. Common, don't you get that if you cut it, you have to reconnect it? Umm, unless you're just weird...