I am currently working on a NESp project, using a PSone screen. I had about 90% of the wiring done (the controller was not fully wired) and had the screen powering up just fine, although a little dull. So I finalized the wiring and everything looked great. I moved my workspace a few feet over and accidentally unwired one connection to the 1/8" mono jack with 5 connections (only 4 of the connections are used in this project FYI). I accidentally re-wired to the other solder point of the mono jack when testing the portable out again and when the game loaded up, the screen flashed white. Now whenever I power up the console the screen will eventually brighten up until it becomes almost completely white. Is something wired incorrectly, or did I screw the screen up previously?

Hopefully someone who frequents this thread has some idea on what I should do to fix my PSone screen.

dude, make your own thread, don't hijack this one.

I have asked the question twice in my own thread, thanks anyways.

3.5" screen rewiev http://forums.benheck.com/viewtopic.php?f=8&t=35263

Once upon a time I found ben's somewhat forgotten brightness hack, and had to find the PAL spot. I forgot to disclose this information at the time, but I am doing so now:

http://kyorune.com/modding/article.php?id=85

any help with madcatz 7.0 universal screen could use pinouts so i dont have to buy ps1 screen i cant find any guides anywhere