This is going to be the same as RPGTKnick's except it will be a lot smaller (same wiring)
I want to use blue black or clear perspex for the case
I am going to have a fan hooked into the 3v line of the n64
i am using an intec gamecube screen which i have been told it is 5.5inch but i havent found anyone like that on the internet i have only seen a 5" and a 5.6" so im not sure
So what do you think??
BTW i forgot to post this before it is unbelievably out of proportion
Your concept looks very similar to mine. I love the design, because it allows for a 5 inch screen, and plenty of room for the controls, plus I LOVE the backloading feature.
Your design looks a lot like a Gameboy. You'll be very hard-pressed to squeeze an N64 in there. I suggest making it wider, otherwise, you might be in trouble. Try to get all your parts together and tape them together, like Ben suggests. That way, you'll know exactly how much plastic and aluminum you'll need. Good luck.
If it ain't broke, rip it apart, gut it, and make it better.
about the size this is a guide i have to get evrything running and then ill make the case and put it all in
an its meantg to look like a gameboy [boring story] it all started 5 years ago when i had a dream my gameboy color could play n64 games and soon it will.......i hope[/boring story]
i meant to do 13 but when i looked at RPGTKNICKS howto it says the interact screen needs 18v but im using an intec screen which needs 12v so i an using 8 aa batteriees
but WITH the d pad