benheck.com Forums

Videogame Hacking
It is currently Wed Jan 17, 2018 2:22 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Oct 03, 2011 3:05 pm 
Offline

Joined: Tue Mar 30, 2010 3:21 pm
Posts: 92
Location: Hell
I recently purchased a non-working Bally Home Library Computer / Professional Arcade / Astrocade system. On power up it would only show a black screen. I found that the original power transformer had no voltage output, so I'm going to start there. It's a really odd transformer with 2 center taps (4 pins output.) The correct voltage from the transformer should be |-10.8-|-7.5-|-10.8-| VAC. It's rated at 85mA for the 10.8v and 1 A for the 7.5v. The astrocade main circuit board has the bridge rectifiers and voltage regulators on it, plus two massive capacitors.
I found a very good schematic on this page: http://www.ballyalley.com/documentation ... 011%29.pdf
It seems the problem is the Astrocade has weird voltage requirements. +15v, +10v, +5v, and -5. WHY!?! I'm also confused about the 15v regulator's existence, I can't see anything that requires it on the schematic!
My question is: could I replace the original AC transformer with a more common |-12-|-0-|-12-| or |-9-|-0-|-9-| center tap transformer? I'm also thinking of forgetting the original power supply altogether and applying the required voltages directly to the board, maybe by adding a colecovision plug.
From what I've read, the Astrocade was the XBOX 360 of its day in terms of reliability. It was very prone to overheating, especially early models.
If anybody has any tips or advice I would appreciate it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB® Forum Software © phpBB Group